Dream Full Depth Convector
How much will it cost?
To help us give you the best possbile deal on this product, please provide further details about your chimney/flue by giving us a call on 0800 033 7136 or fill in our enquiry form.
The Dream Convector Gas Fire provides an exceptional heat output of 4kW. If thats too hot for you, then you can reduce the heat output to a minimum of 1.3kW.
|Min Heat Output||1.3kW|
|Max Heat Output||4.0kW|
|Nett Efficiency Rating||64%|
|Chimney/Flue Type||Brick Chimney; Pre-fabricated Flue; Pre-cast Flue *|
|Flue Notes||These fires are suitable for most pre-fabricated flues dependent on the flue depth and diameter. Please refer to the installation instructions to ensure that this fire is compatible. *Due to the sheer number of varying flue boxes and pre-cast flues it is not possible to advise on which fires are suitable until the existing fire has been removed. If the width at the rear of the pre-cast flue starter blocks is less than 300mm wide the minimum depth of the opening will be not less than 154mm|
|Installation Options||Hearth or Wall Mounted. If wall mounted then a small plinth is required to support the fret/ashpan|
|Engine Depth (mm)||235|